Puppet Role Management System

Overview

This document describes the role-based configuration management system that controls how hosts are managed and what settings are applied.

Role Behavior

No Role Selected

When no role is selected:

• 0 changes are performed on the node
• The system operates in a passive state
• No configuration management occurs

Available Roles

• Monitoring
• Basic

Host Management

• Full Host Management

Subscription-Based Activation

• Monitoring infrastructure is only deployed when an active subscription exists
• The system will not set up monitoring components without a valid subscription (Open Source is enabled

Subscription Expiration

When a subscription expires or becomes inactive:

What Happens:

• Monitoring setup is NOT removed from the host
• The monitoring infrastructure remains in place

What Changes:

• Prometheus is disabled automatically
• This prevents Obmondo from receiving metrics from the host

Result: The monitoring stack remains functional on the host but stops sending data to the central monitoring system.

---

Usage Examples

Monitoring-Only Host

# Deploys only monitoring, always in noop mode
role: monitoring

Basic Managed Host

# Basic management with monitoring
role: basic
full_host_management: true

Custom Role with Full Management

# Custom role + basic + full management
role: webserver
full_host_management: true

---

Mode of Operation

Role	Default Mode	full_host_management	Can Force No-Noop?
None	N/A	N/A	N/A
role::monitoring	noop	Disabled (hardcoded)	No
role::basic	noop	Enabled	Yes (with --no-noop)
Custom roles	noop	Configurable	Yes (with --no-noop)

---

Best Practices

1. Start with noop mode - Always test configurations in noop mode before applying changes
2. Enable full_host_management carefully - Understand the scope of changes before enabling
3. Monitor subscription status - Keep track of subscription expiration to avoid unexpected monitoring disruptions
4. Role composition - Remember that custom roles inherit role::basic settings
5. SSSD requirements - Enable full_host_management if SSSD integration is needed

---

Troubleshooting

No changes being applied

• Check if a role is assigned to the node
• Verify whether you're running in noop mode
• Confirm full_host_management settings if applicable

Monitoring data not appearing

• Check subscription status (active/expired)
• Verify pushprox is not disabled due to inactive subscription
• Confirm monitoring role or monitoring component is properly configured

---

Support

For issues or questions regarding role management and configuration, please contact your system administrator or refer to the internal documentation portal.